MATERIAL SAFETY DATA SHEET (MSDS)

Product Name: Twin Flame Lash Adhesive

Product Use: Professional use in eyelash extension application

Manufacturer: Lashthetics Beauty Supplies overseas supplier
Emergency Contact: 13 11 26 ( Available 24/7)
Website: https://www.austin.org.au/poisons-information-centre
Date of Issue: 05/12/2024

Section 1: IDENTIFICATION

  • Product Name: Twin FLame Lash Adhesive

  • Synonyms: Eyelash Extension Adhesive

  • Chemical Family: Cyanoacrylate-based adhesive

  • Recommended Use: For professional use in eyelash extension application

Supplier Information:
ILIBEAUTY LASH VIETNAM (Verified Custom Manufacturer)
NO. 321 Vinh Hung Street, Hoang Mai District, Hanoi, Vietnam 11712

Section 2: HAZARDS IDENTIFICATION

  • Classification:

    • Skin Irritation (Category 2)

    • Eye Irritation (Category 2A)

    • Specific Target Organ Toxicity – Single Exposure (Category 3)

  • Signal Word: Danger

  • Hazard Statements:

    • Causes skin irritation

    • Causes serious eye irritation

    • May cause respiratory irritation

    • May cause drowsiness or dizziness

  • Precautionary Statements:

    • Wear protective gloves and eye protection with spillage 

    • Avoid breathing vapors

    • Use only in well-ventilated areas

    • In case of contact with eyes, rinse immediately with plenty of water and seek medical attention

Section 3: COMPOSITION/INFORMATION ON INGREDIENTS

Section 4: FIRST AID MEASURES

  • Inhalation: Move to fresh air. If symptoms persist, seek medical attention.

  • Skin Contact: Remove contaminated clothing. Wash affected skin with soap and water. If irritation persists, seek medical advice.

  • Eye Contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention immediately.

  • Ingestion: Not likely to be ingested due to intended use. If ingestion occurs, seek medical attention immediately.

Section 5: FIRE-FIGHTING MEASURES

  • Suitable Extinguishing Media: Use foam, dry chemical, or carbon dioxide.

  • Unsuitable Extinguishing Media: Do not use water.

  • Specific Hazards Arising from the Chemical: Combustible material. In case of fire, harmful fumes may be released.

  • Protective Equipment: Wear self-contained breathing apparatus (SCBA) and full protective clothing when fighting fires.

Section 6: ACCIDENTAL RELEASE MEASURES

  • Personal Precautions: Wear appropriate protective gear, including gloves and safety glasses.

  • Environmental Precautions: Avoid release into the environment. Do not let product enter drains or water systems.

  • Methods for Clean-Up: Absorb spill with inert material (e.g., sand, vermiculite) and dispose of in accordance with local regulations.

Section 7: HANDLING AND STORAGE

  • Handling:

    • Avoid direct contact with skin and eyes.

    • Use only in well-ventilated areas.

    • Avoid inhalation of vapors.

    • Keep away from open flames, heat sources, and direct sunlight.

  • Storage:

    • Store in a cool, dry place away from sources of heat and sunlight.

    • Keep container tightly closed when not in use.

    • Do not store near food or beverages.

Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION

  • Exposure Limits:

    • N-Methyl Pyrrolidone: 10 ppm (OSHA PEL)

  • Personal Protective Equipment:

    • Eyes: Wear safety goggles or face shield.

    • Skin: Wear gloves (nitrile or rubber).

    • Respiratory: If necessary, use a respirator with an appropriate filter for cyanoacrylate vapors.

Section 9: PHYSICAL AND CHEMICAL PROPERTIES

  • Appearance: Black liquid

  • Odor: Slightly acrid

  • Odor Threshold: No data available

  • pH: Not applicable

  • Boiling Point: >150°C

  • Flash Point: >85°C

  • Vapor Pressure: <0.1 mmHg at 25°C

  • Solubility in Water: Insoluble

  • Viscosity: Low viscosity

  • Density: 1.1 g/cm³

Section 10: STABILITY AND REACTIVITY

  • Stability: Stable under recommended storage conditions.

  • Conditions to Avoid: Avoid heat, direct sunlight, and open flames.

  • Incompatible Materials: Strong oxidizing agents, strong acids or bases, and moisture.

  • Hazardous Decomposition Products: In case of fire, may release carbon monoxide, carbon dioxide, and other toxic fumes.

Section 11: TOXICOLOGICAL INFORMATION

  • Acute Toxicity:

    • May cause irritation to eyes, skin, and respiratory system upon prolonged exposure.

  • Chronic Effects: Repeated exposure may cause allergic reactions or irritation in some individuals.

  • Carcinogenicity: Not classified as a carcinogen.

  • Reproductive Toxicity: No known reproductive effects.

  • Sensitization: May cause allergic skin reactions in some individuals.

Section 12: ECOLOGICAL INFORMATION

  • Ecotoxicity: Not expected to be harmful to aquatic life.

  • Persistence and Degradability: No data available.

  • Bioaccumulative Potential: No data available.

  • Mobility in Soil: Not expected to pose a significant environmental hazard when used and disposed of properly.

Section 13: DISPOSAL CONSIDERATIONS

  • Disposal Methods: Dispose of in accordance with local, regional, or national regulations. Do not dispose of in drains or waterways.

  • Contaminated Packaging: Dispose of packaging in accordance with local regulations.

Section 14: TRANSPORT INFORMATION

  • UN Number: UN 3334

  • Proper Shipping Name: Adhesive, Liquid

  • Hazard Class: 3 (Flammable Liquid)

  • Packing Group: III

  • Environmental Hazards: Not classified as a marine pollutant.

Section 15: REGULATORY INFORMATION

  • Safety, Health, and Environmental Regulations:

    • Complies with OSHA (Occupational Safety and Health Administration) standards.

    • Complies with local, state, and national regulations for the transportation, handling, and disposal of adhesives.

Section 16: OTHER INFORMATION

  • Disclaimer: The information provided in this Safety Data Sheet is based on the best available data at the time of publication. It is intended to assist in safe handling, storage, and use. Users should ensure that the conditions of use do not pose any risks to health or the environment.

List of Ingredients
Ingredient CAS Number Percentage
Ethyl Cyanoacetate 137-05-3 60-70%
Cyanoacrylate Polymethyl Methacrylate 9011-14-7 10-20%
Poly Isocyanate Pigment 9003-04-7 5-10%
N-Methyl Pyrrolidone 872-50-4 5-10%
Carbon Black 1333-86-4 0-5%